1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jeep Frame Motor Mount

Discussion in 'Builds and Fabricators Forum' started by canuk, Aug 16, 2010.

  1. Aug 16, 2010
    canuk

    canuk Member

    Chandler AZ
    Joined:
    Jun 17, 2010
    Messages:
    120
    Just bought a new frame, anybody have any links or places to purchase the weld on or bolt on mounts for my Jeep CJ5 1966, suggestions for the weld ETC ETC. Also how do you remove the riviots for the body mounts?
    I am transfering the motor and body to the new frame.
    Any and all information is useful at this point.
    Man is it hot here in Phoenix,:(
    Thanks again
    Best regards
    Terry
     
    canuk, Aug 16, 2010
    #1
  2. Aug 16, 2010
    1970CJ6

    1970CJ6 new mexico air

    rio rancho, new...
    Joined:
    Nov 29, 2005
    Messages:
    630
    1970CJ6, Aug 16, 2010
    #2
  3. Aug 16, 2010
    dvw86

    dvw86 Member

    Eastern Washington
    Joined:
    Sep 23, 2007
    Messages:
    191
    4 or v6 cyl?
     
    dvw86, Aug 16, 2010
    #3
  4. Aug 16, 2010
    canuk

    canuk Member

    Chandler AZ
    Joined:
    Jun 17, 2010
    Messages:
    120
    Sorry,
    V6.
    Thanks
    Terry
     
    canuk, Aug 16, 2010
    #4
  5. Aug 17, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Patrick, Aug 17, 2010
    #5
  6. Aug 17, 2010
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    LOVE the AA motor mount kit. Absolutely love them.

    On removing the rivots, cut an X in the head of it (or t depending on which was you think) and pop those pieces off. Air hammer is your friend.
     
    sammy, Aug 17, 2010
    #6
  7. Aug 25, 2010
    canuk

    canuk Member

    Chandler AZ
    Joined:
    Jun 17, 2010
    Messages:
    120
    Yep your right the X with a angle grinder for the ones i could get to and combination of angle grinder and air hammer, thanks for the hint.looks like i will use the AA motor mount brackets.

    Best regards
    Terry
     
    canuk, Aug 25, 2010
    #7
New Posts