1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

HEI Spare Parts

Discussion in 'Early CJ5 and CJ6 Tech' started by theotherjmmy, Aug 2, 2010.

  1. Aug 2, 2010
    theotherjmmy

    theotherjmmy Member

    Austin, Texas
    Joined:
    Mar 7, 2009
    Messages:
    156
    I'd like to order or buy some spare parts for the GM HEI distributor in my Dauntless. So far I've found the NAPA part number for the module to be TP45SB, but I'd like to find the other things you should carry. Other than the module, what else would be good to have? Does anyone know part numbers that I can take to the FLAPS and get these things. I looked at Rock Auto and went to my local Advace AP Store with no luck. I asked for parts for a 75 Buick Apollo and they just looked at me kind of funny.

    Thanks,
     
  2. Aug 2, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Module is what I'd carry, other than that the HEI is pretty durable.

    Why would they look at you funny, that's one of the applications that an odd-fire 231 was used in?

    There's a few others listed here:

    http://en.wikipedia.org/wiki/Buick_V6_engine#231
     
  3. Aug 2, 2010
    jzeber

    jzeber Well-Known Member 2022 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    3,331
    I carry a new cap and module. We ran into a guy on the Rubicon that had spent 3 long days stuck out there because of a bad module.
     
  4. Aug 2, 2010
    theotherjmmy

    theotherjmmy Member

    Austin, Texas
    Joined:
    Mar 7, 2009
    Messages:
    156
    I found that Auto Zone had parts for a 75 Buick Century with a 3.8 that I think are right. They mention odd fire in the product descriptions. They didn't show anything the right engine size for a 75 Apollo. All that said a cap, module and rotor would be enough? They also list pick-up coils and I think the main coil that's on top of the cap.

    When I went to Advance Auto, they couldn't find anything for a 75 Apollo.

    Thanks for the advice,
     
  5. Aug 2, 2010
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,475
    HEI Parts List - Here is what I have in my book.

    NAPA part #s
    RR194 - CAP
    RR173 - ROTOR
    RR204 - COIL GROUND STRAP
    IC18SB - COIL
    MP105 - PICKUP ***
    TP45SB - IGN MODULE
    RR230 - CAPASITOR + TERMINAL BLOCK
    CARQUEST
    30-1693 - REBUILT DISTRO
    DR-32 - COIL
    DR-443 - COIL CAP COVER
    DR-447 - DIST CAP
    DR-318X - ROTOR
    DR-31A - GROUND STRAP
    CHECKER
    DR400 - CONTROL MODULE
    DR451 - CONDENSOR + TERMINAL BLOCK
    DR427 - PICKUP COIL
    75 BUICK APOLLO OR 76 SKYHAWK USED FOR PART NUMBERS
     
  6. Aug 2, 2010
    theotherjmmy

    theotherjmmy Member

    Austin, Texas
    Joined:
    Mar 7, 2009
    Messages:
    156
    Thanks Warloch:beer:
     
  7. Aug 2, 2010
    Dandy

    Dandy Member 2024 Sponsor

    Estherville IA
    Joined:
    Feb 10, 2008
    Messages:
    795
    Grease to put under the module?
     
  8. Aug 2, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Yeah, I'd say the module and dielectric compound are the two most important things with the proper tools to change the module. Some use an odd size screw head so make sure you have the right size. The coil pickup can go bad but it's so seldom I don't carry one. In 20 years I've had only one go bad and that was because the wires broke inside the insulation from the movement of the vacuum advance. They don't typically go bad. An extra coil, cap, and rotor wouldn't be bad but as long as you have the ground strap installed under the dust cover for the coil they don't normally go bad either.
    Module is the biggie.
     
  9. Aug 2, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Just to add, if you were to need to replace the pickup coil, the distributor has to come out, the gear removed, and the shaft pulled out. It can certainly be done on the trail, but it's a lot more involved than replacing the module.
    As Nick said, they rarely fail..
     
  10. Aug 3, 2010
    theotherjmmy

    theotherjmmy Member

    Austin, Texas
    Joined:
    Mar 7, 2009
    Messages:
    156
    Is it that white heatsink grease?
     
  11. Aug 3, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Yup. Referred to as dielectric compound, dielectric grease, silicone dielectric grease, etc. Also minimizes corrosion between the module and distributor body. Commonly used between ignition wires and distributor caps or ign. wires and spark plug terminals. All the stuff I have used has been clear but I'm sure it comes in other forms.
     
New Posts