1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

torque specs, out put gear on tranny shaft

Discussion in 'Early CJ5 and CJ6 Tech' started by boilermaker154, Jul 12, 2010.

  1. Jul 12, 2010
    boilermaker154

    boilermaker154 jazz

    pittsburgh
    Joined:
    May 13, 2010
    Messages:
    38
    134 4cyl. torque spec for output gear? also, is there a spec for the rear axle & front spindle nut? im sure there's a spec for everything but what is critical?
     
    boilermaker154, Jul 12, 2010
    #1
  2. Jul 13, 2010
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,925
    Rear axle Shaft nut = 150 lb ft (minimum)
    Front spindle is not torqued. Has to have a slight amount of wheel movement. Consult FSM.
    Transmission mainshaft nut (output gear) 130-170 lb ft.
     
    Walt Couch, Jul 13, 2010
    #2
New Posts