what will work off this Wagoneer

My project is a 75 CJ5 with a 304. Besides the 401 what could I use. I'm thinking power steering, front disk brakes, possiblly AC for onboard air, possiblly tilt wheel.

http://albuquerque.craigslist.org/cto/1664012666.html

 

axles, misc parts, seats, whatever will work. I can look at it for you if you'd like, go run compression on it etc.

 

Axles, 44s frt & rr, but the front spring pads need to be outboarded. The front is basically Chevy. Missed the flattop knuckles by one year. The rear is offset but a rear out of a 80 or newer Waggy will work (M20 or D44). Also an early model Isuzu Rodeo (honda version too) has a D44 that will match very nicely.

Column, again, Chevy.

A/C should be a York style, very good air pump.

Steering, saggy but will be the "78", 4 bolt box.

Driveshafts, can be cut down and used.

 

I would be concerned about the lack of title and the legality of how the vehicle was acquired.

 

Thanks Sammy, I'm just thinking here, the 401 is interesting but I would need to go thru it, it says rebuilt but not running. I wouldnt give 700 but with a good 401 it might be worth 4-500 if it has PS and disk brakes. Ididn't think about the title issue since I wasn't considering building it, It seems it was abandon by previous owner so I wasnt really concerned about it being stolen, I would need to get a bill of sale from the seller for sure.