1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

half door hinges???

Discussion in 'Early CJ5 and CJ6 Tech' started by bkd, Mar 26, 2010.

  1. Mar 26, 2010
    bkd

    bkd Moderator Supreme Staff Member

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,292
    picked up these doors off Craigslist cheap, gonna add a solid polished aluminum panel to the back and use them in the summer. Can anyone tell me what kind of hinges I need to attach them to the 6????
    [​IMG]
    thanks, Jim
     
  2. Mar 26, 2010
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,132
  3. Mar 26, 2010
    bkd

    bkd Moderator Supreme Staff Member

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,292
  4. Mar 26, 2010
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,132
    Looks like you've got the pattern for the standard lower hard door hinge already. As a 1/2 door w/aluminum skin will weigh about what a full soft top door does, I'd think a set of those would work, esp w/a backer plate on the lower one. Top hinge looks like it's right on the w/s hinge, some 76+ w/s hinges have a built in hinge there, I think for factory equipped softops. I have a set of those when I swapped to a 76+ w/s frame for a while. Are the hinge pin locations adjustable on that door frame,or fixed?
     
  5. Mar 26, 2010
    bkd

    bkd Moderator Supreme Staff Member

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,292
    they're fixed, and I think the original full door hinge location is to far away to work
    Jim
     
New Posts