can't get the crankshaft out

Help? Torn engine apart cannot get last last main bearing out, Manual says I need a special tool. Need to get crank out to measure it.

 

225, but i cried for help to early. went back out and used a wheel puller by screwing in threaded rod into oil pan holes and then tapped on the h bar with a hammer and it slowly came off. Thanks for your response. crank is out. Have tomeasure measure measure. But visually it lookes good

 

Be sure to measure all journals at three positions, that are 120* apart.

You need to check for roundness, not only size.

Good luck

 

thanks I will do that