hydraulic clutch pics

Does anyone have any pics of there hydraulic setup for there clutch at the trans? I have a t90 trans mated to a 350 chevy. Im having a had time figuring out how to mount my slave cylinder.

 

What engine/trans?

 

Here is how I mounted my Slave Cylinder.

[/IMG]

 

This one is on a small block chevy, made from 1/2" 6061 flat plate, and just bolted on by the bell housing bolts. Cylinder is Wagner SC 103460 (7/8"). Some of the cast iron GM bell housing have a boss for mounting the slave directly to the bell housing.

 

Where are you guys finding room for the master cylinder? and does anyone have pics of it under the hood and from the peddle side?

 

If you have the power brake booster on the firewall, the clutch master is a problem. Mine is mounted facing the rear, under the cowl, on the inside of the firewall and is supported by the swinging peddle assembly. This is somewhat similar to how the FC 150/FC 170 brake masters are mounted.
This is the modified Wilwood cylinder I used
Fabricated clutch swing peddle
Wilwood reservoir on firewall mounted bracket

Reservoir mounting again
End of clutch master cylinder visible next to steering column drop

Sorry I do not have jpg of actual swing peddle/cylinder mount but way to much crap obstructing view.

 

haha.. i never thought to mount it facing that direction.. nice.

btw: I want your jeep! *drools*

 

Heres mine.

[/IMG]

[/IMG]

Here's the top of the clutch pedal.

[/IMG]

 

Awesome thats given me some good ideas. Thanks guys!