Cj5 replacement body panels

Can anyone tell me a good company to get side panels for my 75 cj5? ive looked at ones from quadratec and the pics showjust flat panels. Can you get them with the jeep embosment and all the CURVES?

 

Looks like you cannot get the correct ones the earlier years but the 76-83 style will work.

From what I have found out is the later panels has the gas filler hole indentation but not the rear indentation over the wheels well.


So.... Newer panels will fit the early 5's........ They just are not correct.

Correct everyone?

 

Try Classic Enterprises http://www.classicent.com/jeep.php

Call them and ask them about the specific features that you need.

 

I wish Classic Enterprises has the correct JEEP font for my 1973..

 

That's the only issue as far as I can tell. All the panels seem to have the 76+ Jeep embossing on the side panel.

FWIW, I have purchased several items from Classic and the quality is very good. I recently put on the lower 4" repair panel on both sides. I also did the riser between front and rear and I've purchased, but not put on, the valence brackets. No issues with any of the parts. If he doesn't have it in stock already it might take awhile for them to fab it and ship it. I waited about 10 days for the riser, but it was worth it.

 

Is Jeep Panels Plus completely out of the game now? Last I'd heard, they'd slid off the 'web and were only available by phone. Still true? I need a rear floor panel.

 

Hey Ron, found this on the G: "Hello everyone,Stephen from Jeepanels Im putting a message here to fill folks in on the status of my dad,Sheldon.a year ago he was diagnosed with non-small cell lung cance,Since then he's undergone chemotherapy and radiation treatments But at best it's only slowed the cancer's progression,surgery is not an option.My family has received much encouragement from the jeep community and it's been greatly appreciated.This has thrown a monkey wrench into the works at the shop,And as a result too many orders have gone out long past what is acceptable for turn around time.We know this has been frustrating and maddening and rightly so,We are finally getting back up to speed And getting things ironed out.We appreciate the patience of everyone.We're still kicking and will be for some time." All above in quotes are from the OP on the Gee. Phone is the best contact. As far as aftermarket panels, I WOULD NOT buy any offshore made full side replacement panel for my JEEP. Metal gauge is wrong, primer is junk, they don't fit, and already have no primer/bare metal/RUST in any place where there are braces or two panels overlapped. Spot welds are junk, and alot of the side panels are made to be "slip on", made to be put OVER the existing problem you're trying to cure. I could go on forever, but you get my point.

 

Thanks man! I don't want to buy my floor from anyone else, guess I should call and get one ordered anyway.

 

Yup, I am getting my floors from them, just need to call them up.

 

Sounds like the right place! But how do i get a hold of them? can you give a number or a site please?

 

Jeep Panels Plus Phone: (207) 743-7671
Classic Enterprises: http://www.classicent.com/

 

Thanx! ill giv em a shout!