Removing emergcy brake

The tub is just about ready to be removed except for a couple of items still holding it down...

1. Emergency Brake Cable - I disconnected the emergency brake from the side wall but I don't know how to disconnect the cable which leads through the tub. (I really do not want to cut it)

2. The wiring harness for all be back lights. All I think I need to do here is lift the tub about 1 foot off the frame to get at these wires a little easier and that should do the trick.

Any help is appreciated. Thanks

 

The alternative to removing the cable at the pedal is to go under the tub, in the center just forward of the rise to the rear floor you'll see the bracket where the front e-brake and rear e-brakes connect...just disconnect it there.

 

thanks a lot. I'll do that.