1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

60/40 bench seats project

Discussion in 'Builds and Fabricators Forum' started by adams77, Oct 22, 2009.

  1. Oct 22, 2009
    adams77

    adams77 Member

    Statham, GA
    Joined:
    Jul 21, 2009
    Messages:
    92
    I always loved the bench seat up front but never had a jeep with anything other than low back buckets. So........I found a set of school bus seats and had a leftover passenger frame from a willys wagon (I think). Everything will fit.

    The back seat will need to be shaved by 1/2 inch to work but the front looks great.

    [​IMG]

    [​IMG]


    Now time to get fabbing on the seat brackets.
     
    adams77, Oct 22, 2009
    #1
  2. Oct 22, 2009
    pathkiller

    pathkiller Member

    Lorton, VA
    Joined:
    Apr 17, 2005
    Messages:
    878
    Where'd you find bus seats that don't have 50lbs of old bubblegum stuck to the bottoms and "Bobby loves Sue Ann" carved into the seat with a pocket knife? :)

    Looks good, and functional. Rigging up seat belts and a roll bar?
     
    pathkiller, Oct 22, 2009
    #2
  3. Oct 22, 2009
    adams77

    adams77 Member

    Statham, GA
    Joined:
    Jul 21, 2009
    Messages:
    92
    Shoulder belts and a full cage are on the way.

    No bubble gum or carvings on this one, must have been a church bus
     
    adams77, Oct 22, 2009
    #3
New Posts