"JEEP" Decals

Will be in the mail Monday. Sorry it has taken so long but it took me a few days to get to the shop after they called.

 

Not a problem. Thanks for the effort to get them done!

Stan

 

hey, take all the time you want. i wouldn't even know how to begin on these. which is why i jumped at the chance to get them in the first place.

 

Thanks for understanding, they are in the mail.

 

Thanks, Scott. I figured we were getting close, when my check finally cleared.

 

Thanks Scott.

 

got them today, but messed up the application... just figures. it brings the side out a little more, but i don't really know if i like em too much yet. ya know?

 

It is best to apply them one letter at a time. And if you are going to be off-center, be on the high side.

 

Scott thanks again, mine showed up yesterday.

 

Mine came yesterday. Too busy swapping out the M715 carb to even look at them yet but I will this weekend. Thanks Scott!

Stan

 

Scott, these decals are great! I pulled the backing on the sheet off, then trimmed straight across along the top of the letters. This allowed me to get the top edge right where I wanted it and then I just pressed them into place as a unit. Worked great and looks much better than I could have done with a shakey hand and some paint!

Thanks again.

Stan

 

Stan: Same thing that I did. Except I applied 2 at a time, while still attached to the "release paper". As long as you get a straight line trimmed across the top of the lettering and align it with a pencil mark you put on the Jeep, you can align them perfectly. VERY HAPPY!

 

Glad they are working out for everyone.

 

Finally got to the po to get mine. Thanks Scott.