1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Speedo

Discussion in 'Early CJ5 and CJ6 Tech' started by dohc281, Aug 10, 2009.

  1. Aug 10, 2009
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    When I drive the Jeep the speedo reads erratically. If I am in third gear and have my foot lightly on the accelerator pedal it reads close to normal, if I am accelerating then it reads 0. The speedometer and cable are about 3-4 years old. Any ideas?
     
  2. Aug 10, 2009
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    Never mind, I did a search and got some ideas. Sorry.
     
  3. Aug 11, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,923
    What did you find?
     
  4. Aug 11, 2009
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    I need to snip off about 1/4" of the cable end that goes into the speedo because it is too long and this should solve the problem. I'm going to try it this weekend.
     
  5. Aug 11, 2009
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    You need to remove one end and shoot some white lithium grease into it and spin it. If that doesn't clear it up, it's new cable time.
     
  6. Aug 12, 2009
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    I'll try both ideas, one has got to work.
     
  7. Aug 12, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,923
    Jack up both rear wheels and try it. If your inner core was too long it would cause binding and cause the speedo to jump but not go to zero. Be sure that you have square ends on the core.
     
New Posts