1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Heater box removal?

Discussion in 'Intermediate CJ-5/6/7/8' started by trickpatrick, Feb 25, 2009.

  1. Feb 25, 2009
    trickpatrick

    trickpatrick Done? LOL

    North Idaho USA
    Joined:
    Nov 29, 2006
    Messages:
    838
    I have searched.

    I am replacing a stock heater for a heatercraft unit for a friend and cant figure out how to get the stock plenum out....

    2 bolts behind the battery.
    Has to be more anybody help.

    CJ 5, 1973, 304.
     
    trickpatrick, Feb 25, 2009
    #1
  2. Feb 25, 2009
    Bob75CJ

    Bob75CJ Member

    Southgate, Mi
    Joined:
    Aug 23, 2007
    Messages:
    206
    Should be about 5 holding it on. Most look like studs sticking through the firewall with nut on them. One is about even with the intake manifold, one is below and left (looking under the hood, pass side). One is center of the left side (facing again) and just under the driprail for the hood. Seems like one of he battery tray bolts is one of them too.If it has the cowl vent that must be filled/capped hose that connects to heater plenum. or you will get a lot of water and snow in. This is all on memory, so might not be right.
     
    Bob75CJ, Feb 25, 2009
    #2
New Posts