aftermarket heater pics please.

I put a 5/8 nipple in mine, so I could run 5/8 heater hose. You should probably wait and see if yours had a plug or a nipple or ??

 

once again.
sound advice.
i am thinking of ordering the heater/vents/switch and going to town and buying the hoses and fittings.

 

Here's how I handled the Defrost & the Heat

 

5f
wow great idea.
thanks buddy

 

No problem at all.
I used the existing holes in the firewall for the heater hoses (doesn't matter what order, warm water goes into the core, then comes out) the air vent tubes & directional vents come with the heater unit along with the mounting brackets & 3 speed switch. I mounted the vents under the dash directly in front of my shifter, there is no interfearance and I can direct the hot air flow in any direction and the three speed fan is great. With the soft top on, the unit cooks up in no time at all. I also had a pretty chopped-up dash, so here's a shot of how I dealt with it. Added an aluminum panel and additional gauges, then arrainged to suit.

 

You REALLY did not have any space left behind your dash, did you?

 

Look at that last pic. I got the hole Jeep behind it, no sweat.

 

I meant the picture of your old heater setup.
Grins!

 

True that for sure, those babies sure did take up a lot of room. I still have that old heater setup,, interested? It'll be cheap!

 

after looking carefully at the photo's
that cant be Minnesota.
there is actually some melted ice on the ground!R)


i lived in elmore when i was a kid.
BRRRR!!!