1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

lift kit

Discussion in 'Early CJ5 and CJ6 Tech' started by 57cj5, Oct 2, 2008.

  1. Oct 2, 2008
    57cj5

    57cj5 Member

    North Carolina
    Joined:
    Aug 31, 2005
    Messages:
    593
    Decided to go with either a Black Diamond 3" lift or BDS 2.5" lift and forego the Holbrook kit because of cost. Looking at these kits they don't include the shackles/hanging hardware. I assume the original did not use shackles but some sort of C shaped bolt. If I buy a kit what other parts will be needed to complete the installation? I will be starting from scratch as my original suspension components are gone (broken or rusted beyond use). I think I will need shackles and bushings. ANything else? I also read in previous forums that there was a problem with the U bolts not being the right ones. Still a problem? I have a 57 CJ5 with a 283 engine, Thanks, Paul
     
    57cj5, Oct 2, 2008
    #1
  2. Oct 3, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    The original Jeep did use shackles. They're called silent block shackles.

    Axle U-bolts may or may not be the correct size. If not they're available from the parts store.

    The lift kit should come with new bushings, be sure you know what it comes with. There's plenty of information in the forum here about replacing them as well.

    You could just reuse your old shackles or buy new direct replacements or retrofit H-type shackles.
     
    Last edited: Oct 3, 2008
    sparky, Oct 3, 2008
    #2
New Posts