1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

2 wheel low ?

Discussion in 'Early CJ5 and CJ6 Tech' started by cjmike1962, Sep 28, 2008.

  1. Sep 28, 2008
    cjmike1962

    cjmike1962 Member

    Crete Ill.
    Joined:
    Jul 29, 2008
    Messages:
    56
    If i leave the bullet out between the shift rails on the dana 18 transfer case will this give me 2 wheel low. It apears that way to me and if it will is there any draw back or problems this could cause like the TC getting stuck in a gear or locking up due to mialingment of the rails?
    Thanks
    Mike
     
    cjmike1962, Sep 28, 2008
    #1
  2. Sep 28, 2008
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Sep 28, 2008
    #2
  3. Sep 28, 2008
    cjmike1962

    cjmike1962 Member

    Crete Ill.
    Joined:
    Jul 29, 2008
    Messages:
    56
    Thanks for the link i serched but that did not come up. more info from anyone running their case this way would be great. again thanks blevisay.
     
    cjmike1962, Sep 28, 2008
    #3
  4. Sep 28, 2008
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Sep 28, 2008
    #4
  5. Sep 28, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Sep 28, 2008
    #5
  6. Sep 28, 2008
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    I am running mine that way:)
     
    blevisay, Sep 28, 2008
    #6
  7. Sep 28, 2008
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Sep 28, 2008
    #7
  8. Sep 28, 2008
    CJ-X

    CJ-X Member

    Ohio
    Joined:
    Aug 6, 2006
    Messages:
    816
    Run it that way , it is very useful and does not hurt anything. I have run them like that for years.
     
    CJ-X, Sep 28, 2008
    #8
  9. Sep 28, 2008
    cjmike1962

    cjmike1962 Member

    Crete Ill.
    Joined:
    Jul 29, 2008
    Messages:
    56
    Just what I wanted to hear. Thanks for all the quick suport.:)
     
    cjmike1962, Sep 28, 2008
    #9
New Posts