1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

72 cj5 brake light switch connector

Discussion in 'Intermediate CJ-5/6/7/8' started by shootist4, Sep 17, 2008.

  1. Sep 17, 2008
    shootist4

    shootist4 1975 CJ5

    Cascade, ID
    Joined:
    Jul 22, 2008
    Messages:
    17
    Does anyone know a source for electrical connectors for the brake light switch for a 1972 cj5? The switch has two flat terminals. I know that single female spade terminals will work, but I was wondering if there is a source for the two wire connector.
    Thanks,
    Shootist4
     
    shootist4, Sep 17, 2008
    #1
  2. Sep 17, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Fairly sure it's the same as the backup lights connector. Search for that.

    Also, it's the same plug that the earlier Jeeps use - check the Early CJ5 forum.
     
    Last edited: Sep 17, 2008
    timgr, Sep 17, 2008
    #2
  3. Sep 17, 2008
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,134
    Try Rhode Island Wiring,

    http://www.riwire.com/

    They have "Brake Switch Terminals", look like a skinny spade connector.

    H.
     
    Howard Eisenhauer, Sep 17, 2008
    #3
  4. Sep 17, 2008
    shootist4

    shootist4 1975 CJ5

    Cascade, ID
    Joined:
    Jul 22, 2008
    Messages:
    17
    Thanks for your help.
     
    shootist4, Sep 17, 2008
    #4
  5. Oct 3, 2008
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,260
    You might want to visit your FLAPS and ask for a SLS24 (NAPA P/N ECHSL113). This switch has screw-on terminals rather than bullet connectors or spade connectors.
     
    Vanguard, Oct 3, 2008
    #5
New Posts