1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

D-44 bearings

Discussion in 'Early CJ5 and CJ6 Tech' started by ETZFAM, Jul 28, 2008.

  1. Jul 28, 2008
    ETZFAM

    ETZFAM FLATIES & ROUND FENDERS, SOME EVEN RUN

    WENATCHEE, WA
    Joined:
    Jul 4, 2007
    Messages:
    63
    Does any one have all the Timkin bearing # for the D-44 tapered, I am rebuilding it and need the numbers for the carrier bearings and the pinion bearings, so I have everything before I start. :)

    Thanks


    Rick


    :flag:
     
    ETZFAM, Jul 28, 2008
    #1
  2. Jul 29, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I don't have the part #'s handy but any Dana 44 up to '86 uses the same pinion bearings inner and outer as well as races and seal. If you have tapered axles you will need to ask for carrier bearings for a 10 or 19 spline axle. The 27/30 spline flanged axles use larger carrier bearings. Any diff supplier/ parts suppliers worth their salt should be able to get the correct ones. If you are having difficulty contact Randy's Ring and Pinion. They can supply you with the correct parts but you have to specify what you have. Best of luck.
     
    nickmil, Jul 29, 2008
    #2
New Posts