1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

brake drum removal

Discussion in 'Early CJ5 and CJ6 Tech' started by BRETT DICKEY, May 29, 2008.

  1. May 29, 2008
    BRETT DICKEY

    BRETT DICKEY New Member

    Joined:
    May 29, 2008
    Messages:
    1
    I am new Jeep owner that has taken on a restore project. I have a pretty strong technical background but always welcome tips and hints. I am doing a restore on a '65 CJ5. I have gone through the fuel system with little headache and now moving on to the brake system. My first major snag...how do I remove the front brake drums without destroying something? There does not appear to be a place for jack bolts, no lips to grab with a slide hammer or pry bar...any tips?

    BD
     
    BRETT DICKEY, May 29, 2008
    #1
  2. May 29, 2008
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    I would remove your locking hub or drive flange, remove the axle retaining nut and washers and then pull the hub and drum as a unit. You may need to back off your shoe adjusters. These may be star adjusters if you have 10" or 11" brakes or eccentric cams if you have 9" brakes.
     
    Vanguard, May 29, 2008
    #2
New Posts