1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dumb question on CJ6 exhaust?

Discussion in 'Early CJ5 and CJ6 Tech' started by JonVO20, May 2, 2008.

  1. May 2, 2008
    JonVO20

    JonVO20 NOS CJ6

    Colorado
    Joined:
    Oct 21, 2007
    Messages:
    52
    OK,
    I"m at a point where I need exhaust parts for the CJ6 project. Basically keeping things stock for now, I can find the downpipe, muffler and the tailpipe. Cannot seem to locate the proper center exhaust pipe for a CJ6? This has the 134 F head. Am i missing something? Performed pretty extensive searching and no one appears to carry the correct length pipe. I can probably have a local shop bend up a pipe, but I have to get it there somehow...
    What have some other CJ6 folk done for exhaust?
    JVO
     
    JonVO20, May 2, 2008
    #1
  2. May 2, 2008
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    I'd go the muffler shop route, any of them can supply and/or bend up the pipe you need
    Jim S.
     
    bkd, May 2, 2008
    #2
  3. May 2, 2008
    1970CJ6

    1970CJ6 new mexico air

    rio rancho, new...
    Joined:
    Nov 29, 2005
    Messages:
    630
    I bought a set for a CJ5 from Turner 4 x 4 and got a 24" peice from FLAPS for the center section.

    Andrew
     
    1970CJ6, May 2, 2008
    #3
  4. May 2, 2008
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Eh - pile in and drive it down there open...I'm sure you won't be the first. I've always had good luck with local shops.
     
    Boyink, May 2, 2008
    #4
  5. May 2, 2008
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    After ripping the muffler/exhaust off the f-head at John Bull last year I drove the 6 open for a week before repairs were done....sounds pretty good open R)
    Jim S.
     
    bkd, May 2, 2008
    #5
New Posts