1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Later model Dash

Discussion in 'Intermediate CJ-5/6/7/8' started by BrandyMB, Apr 19, 2008.

  1. BrandyMB

    BrandyMB New Member

    I have a '75 CJ5 with a dash that has more holes than a swiss cheese. I would like to put a later model, like '76 up dash in it. Has anyone done this before? Can anyone give me any advice? I can't find anyone who sells 75 and older dashes anyway. Whay don't they make stuff for the older models??
    Mark
     
    BrandyMB, Apr 19, 2008
    #1
  2. aallison

    aallison 74 cj6, 76 cj5. Has anyone seen my screwdriver?

    I can get get you a 56-75 dash no problem. But all the dash's are the same except for the way the steering column mounts, the glove box, the way the windshield stays up, and a couple of other minor differences. Nothing you can't work out. But they will need a bit of modification to make them work.

    But the older dash's (if I remember correctly) can still be bought as reproductions with no holes, holes for gauges, etc. I just don't remember where.
     
    aallison, Apr 19, 2008
    #2
  3. barely3

    barely3 Spending my retirement

    I just had a blank dash made for my '75 at RJR Offroad in Tualitin, OR. It looks great!.

    Here is the contact info:

    http://www.rjroffroad.com

    RJR Off-Road Products
    11100 SW Industrial Way
    Tualatin, OR 97062

    Hours of operation: 7:30AM to 4:00PM PST Monday-Friday

     
    barely3, Apr 23, 2008
    #3