1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Torque specs

Discussion in 'Intermediate CJ-5/6/7/8' started by DBaughman, Apr 13, 2008.

  1. Apr 13, 2008
    DBaughman

    DBaughman A Jeep Called Mater

    Dallas TX
    Joined:
    Dec 28, 2006
    Messages:
    16
    I need to know what the torque is for the cap bolts for a Dana 30 & 35 that holds the bearings in the housing.
     
    DBaughman, Apr 13, 2008
    #1
  2. Apr 13, 2008
    brianmurphy

    brianmurphy 866

    Whitmell, Va.
    Joined:
    Jan 4, 2007
    Messages:
    38
    brianmurphy, Apr 13, 2008
    #2
  3. Apr 13, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    There's a '72 manual here: www.c104.net - '72 Jeeps used 30s in the CJ, Commando and Wagoneer.
     
    timgr, Apr 13, 2008
    #3
  4. Apr 14, 2008
    80cj

    80cj Member

    Hawaii
    Joined:
    Sep 1, 2003
    Messages:
    554
    According to my 80 CJ service specs manual, set to torque is 40 ft. lbs.
     
    80cj, Apr 14, 2008
    #4
New Posts