T14 and D18 Rebuild Kits

On the T-case.

1. Make sure to use a good (hardened) intermediate shaft (Novak).
2. Use all the tricks to seal it up so it doesn't leak (ok, so it doesn't leak worse than it did before the rebuild).

 

It does not have a standard intermediate shaft.

I have never seen so much RTV.... Who ever did it last did not use any seals, just a bunch of RTV.

Here is a bunch of pictures of the tcase. These are large images and may take a minute to load...

=>BROWSE<=

 

My wife got me a blasting cabinet for my birthday.... can't wait to use it.

 

Why would one beaing (right) be packed with greese and the other (left) appear to be "clean"?

 

--------------------------------------------------------------------------------

Why would one beaing (right) be packed with greese and the other (left) appear to be "clean"?

 

shrug
maybe because the rear is turning all the time (and gets fresh oil) whereas the front doesn't unless the hubs are locked.

 

Is it possible the "greased" bearing was greased at the previous rebuild, and the grease never dissolved into the gear oil?

 

That would be my guess.

 

Just a tool tip....

Great new tool for cleaning out the threads on the case.... My Glock pistol cleaning kit.