1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rollcage build

Discussion in 'Builds and Fabricators Forum' started by Hi5nCJ, Mar 24, 2008.

  1. Mar 24, 2008
    Hi5nCJ

    Hi5nCJ Hi5nCJ

    Omaha, NE
    Joined:
    Dec 27, 2007
    Messages:
    84
    Finally got the cage going. I still need to weld in my gussets & do a lower windshield bar but here's what I've got so far. I put a coat of primer on it to keep the rust off. It will eventually be painted orange.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Hi5nCJ, Mar 24, 2008
    #1
  2. Mar 24, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Looks nice!

    I've got to get mine installed. :rofl:
     
    sparky, Mar 24, 2008
    #2
  3. Mar 24, 2008
    bkap

    bkap Gone, but not long gone.

    Tucson, AZ
    Joined:
    Sep 9, 2006
    Messages:
    784
    Looks good, although I might be a little concerned about the unsupported rear corners in crunch time.
     
    bkap, Mar 24, 2008
    #3
New Posts