1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Autometer tach question/problem

Discussion in 'Intermediate CJ-5/6/7/8' started by High5, Jan 10, 2008.

  1. High5

    High5 Member

    Hey guys,

    Installed my tach Sunday. Noticed yesterday that no matter how much throttle I give it, the tach won't go higher than 2300 RPM. I'm not sure if I have the little switches in the right position inside the back cover or not.

    Any advice???

    High5
     
    High5, Jan 10, 2008
    #1
  2. hudsonhawk

    hudsonhawk Well-Known Member

    It is adjustable for 4-6-8 cylinders. I would pull the tach and make sure your dips are set correctly. If you cannot find the documenttion that came with the TACH you can download a PDF from autometer.
     
    hudsonhawk, Jan 10, 2008
    #2
  3. High5

    High5 Member

    Yeah,
    I have that in the Jeep still. I hope that I just don't have those tiny little switches in the right position.

    Thanks:)
     
    High5, Jan 10, 2008
    #3