1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 V6 intake valve

Discussion in 'Early CJ5 and CJ6 Tech' started by rossbos, Dec 9, 2007.

  1. Dec 9, 2007
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Which valve is the intake, the first or the second.
     
    rossbos, Dec 9, 2007
    #1
  2. Dec 9, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    :?
     
    sparky, Dec 9, 2007
    #2
  3. Dec 9, 2007
    farfle

    farfle old dog

    Mariposa, CA
    Joined:
    May 14, 2007
    Messages:
    430
    Yes.
     
    farfle, Dec 9, 2007
    #3
  4. Dec 9, 2007
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Two responces but no clear answer. Such a simple question, I'm sure someone knows.
     
    rossbos, Dec 9, 2007
    #4
  5. Dec 9, 2007
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Uh, no answer because the question isn't clear, not by a long shot.

    Give me a clear question and I can try to help. :? Isn't an answer, it's "I'm confused..."
     
    sparky, Dec 9, 2007
    #5
  6. Dec 9, 2007
    cpt logger

    cpt logger Member

    Western Colorado
    Joined:
    Feb 6, 2006
    Messages:
    108
    First, from where? Front of jeep? Firewall forward? Right or left bank? Buick engine? If numbering from the front, One bank will have the first valve an intake valve, the other bank will have an exhaust valve as the first one. Lets ASSUME a Buick 225, Look at the exhaust manifolds. They will line up with the exhaust valves, all six of them. If in doubt, buy a manual that covers the engine you are working on, It will tell you. You will not beleive how handy a manual is. Second, why are you asking? You are aware that this engine will have 6 intake valves? Or at least it came from the factory with six of them. Which one of these six do you want? Again, WHY? In other words what exactly are you asking? Not to be a butt, but what information do you need? How can we help? Do you think you have a burned one? Not likely. Maybe a bent one? Let us know how we can help, Matt W.
     
    cpt logger, Dec 9, 2007
    #6
  7. Dec 9, 2007
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The larger one. The one that connects to the port in the intake manifold. By number 1, do you mean the one closer to the front of the engine?
     
    timgr, Dec 9, 2007
    #7
  8. Dec 9, 2007
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    it will be the bigger valve if you have the head off. I know this does you no good, but when I rebuilt mine last year I had an old manual that had the info...


    I """think"""
    front ->back
    drivers side
    EIEIIE
    pass would be the same from back to front.
     
    termin8ed, Dec 9, 2007
    #8
  9. Dec 9, 2007
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    I was talking about the # 1 cylinder, first cylinder on the left side. which one of the valves is the intake the first one or the second one. I should have been a little more clear, sorry.
     
    rossbos, Dec 9, 2007
    #9
  10. Dec 10, 2007
    wmunny

    wmunny Member

    Joined:
    Sep 23, 2006
    Messages:
    62
    number one cylinder second valve is the intake. number three cylinder second valve is the intake. number five cylinder first valve is the intake.



    good luck................................
     
    wmunny, Dec 10, 2007
    #10
New Posts