1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

leg room

Discussion in 'Early CJ5 and CJ6 Tech' started by clay, Nov 29, 2007.

  1. Nov 29, 2007
    clay

    clay Driving

    Hopkinton, MA
    Joined:
    Aug 14, 2005
    Messages:
    338
    can someone measure from their brake pedal to the front of the seat I only have 10 " I'm only 5'8' and this seems tight (Besttop trail max seats) I can do the notch just didn't think I'd half to. Thanks all
     
    clay, Nov 29, 2007
    #1
  2. Nov 29, 2007
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    From my 61: 17+ to a stock frame (reupholstered as near to stock). I'm 6'6"; been driving it since I was tall enough to reach the pedals over 40 years ago.
     
    Last edited: Mar 4, 2008
    Steamer, Nov 29, 2007
    #2
  3. Nov 29, 2007
    stalin440

    stalin440 member

    Elmira, NY
    Joined:
    Feb 4, 2007
    Messages:
    89
    well i can't measure since mine isn't all together but i am 6'2'' and i plan to do the fender notch as well. are you using stock seats or aftermarket? the difference maybe a couple inches between the two:?
     
    stalin440, Nov 29, 2007
    #3
  4. Nov 29, 2007
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    Seats will make a HUGE diff. I am 5'10" and have never had to notch until I went to the PRP seats I am running.
     
    Warloch, Nov 29, 2007
    #4
  5. Nov 29, 2007
    groomer_guy

    groomer_guy Member

    Western...
    Joined:
    May 12, 2007
    Messages:
    233
    Mine is also 17 + inches. I have aftermarket high back seats. I am 6' 5" and have no notch cut out done either and I fit fairly well. Not like my pick up but I fit. I agree seats do make the difference.

    Jim
     
    groomer_guy, Nov 29, 2007
    #5
New Posts