1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

repair kit for my rochester carburetor

Discussion in 'Early CJ5 and CJ6 Tech' started by friendxconnect, Jul 17, 2007.

Page 1 of 2
  1. friendxconnect

    friendxconnect Member

    hello,
    Is this repair kit available for my carburetor?

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Tank you for your answers!
    Bruno
     
    friendxconnect, Jul 17, 2007
    #1
  2. sparky

    sparky Sandgroper Staff Member Founder

    Bruno,
    If you can get parts from NAPA rebuild kits are available. At least here in the states they are available and that's the kit most of us choose to use when rebuilding these carbs.

    Could you resize the images in your post? Folks on dial-up won't appreciate waiting an hour for their computer to load the images. ;)
     
    sparky, Jul 17, 2007
    #2
  3. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    napa part # 2-5478
     
    dauntless_powered, Jul 17, 2007
    #3
  4. friendxconnect

    friendxconnect Member

    I just resize the files, is it better now?


    for napa, i think they don't ship in Europe, and i cannot find this part on rock auto.

    i 'll have a look at napa site.
     
    friendxconnect, Jul 17, 2007
    #4
  5. sparky

    sparky Sandgroper Staff Member Founder

    Much better! Thank you.
     
    sparky, Jul 17, 2007
    #5
  6. friendxconnect

    friendxconnect Member

    please Daultness_powered could you give me the link of the part, ican't find it on mapaonline.com
     
    friendxconnect, Jul 17, 2007
    #6
  7. sparky

    sparky Sandgroper Staff Member Founder

    sparky, Jul 17, 2007
    #7
  8. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    This looks like a HyGrade Jiffy Kit, which was made by Standard Motor Products. I don't think the Jiffy Kits are in production any more - at least Standard does not list them, and there's no company link that I could find. You should be able to cross-reference this kit to another brand, either through Rock Auto or a local supplier.
     
    timgr, Jul 17, 2007
    #8
  9. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    timgr, Jul 17, 2007
    #9
  10. friendxconnect

    friendxconnect Member

    yes timgr i find it on ebay and i want to know if it is the right kit for my carb.
    can you give me the link of this part on rock auto?
     
    friendxconnect, Jul 17, 2007
    #10
  11. sparky

    sparky Sandgroper Staff Member Founder

    The one on E-bay ships worldwide, I'd buy that one, especially if NAPA won't ship to Europe.

    This is the correct one, note the carburetors it's for:
    [​IMG]

    Yours is a 2GC from the looks of it.
     
    Last edited: Jul 17, 2007
    sparky, Jul 17, 2007
    #11
  12. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    There's no listing for that kit on the Rock Auto site - in fact, there's no listing for any carburetor kit for a '71 V6 Jeep on Rock AUto. The Napa site www.napaonline.com crosses the number to CRB 25504, which is for a 2GV. It's probably the right kit, since the Jiffy Kits were made to cover a lot of different applications.

    I'm sure I could go to my local parts store and they could look up the application for your kit in the old paper catalogs, but I don't have as many options online - that brand is no longer being manufctured. PartsAmerica shows a couple of different kits for the 2G and the 2GV, but they too will not ship overseas.

    <edit> Sparky says it will work - I'd go with his advice and get the eBay kit.

    Or are you just checking if the kit you have is the right one? If it's not, the parts will obviously not fit.
     
    Last edited: Jul 17, 2007
    timgr, Jul 17, 2007
    #12
  13. friendxconnect

    friendxconnect Member

    What i need is the gasket of the pump assembly, is it inside the kit of ebay?

    [​IMG]
     
    friendxconnect, Jul 18, 2007
    #13
  14. sparky

    sparky Sandgroper Staff Member Founder

    You need a new accelerator pump assembly?

    I see one in the package on the lower left side.

    Rebuild kits will have what you need in them to fully rebuild the carb. I've done plenty of 2Gs. It's easy to do.
     
    sparky, Jul 18, 2007
    #14
  15. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    I just ordered one from Walcks.
    Any volunteers to rebuild mine?
    I'm kinda' scared.:?
     
    Buildflycrash, Jul 18, 2007
    #15
  16. friendxconnect

    friendxconnect Member

    No I need the black seal of the pump assembly
     
    friendxconnect, Jul 18, 2007
    #16
  17. sparky

    sparky Sandgroper Staff Member Founder

    I still don't follow what you need?

    Can you give me a diagram with it circled or something, be specific please.
     
    sparky, Jul 18, 2007
    #17
  18. Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    I rebuilt my Carter YS about a year ago and I had never opened up a carb before. It was farily straight forward. Do a search and you might be able to find rebuild directions if they're not included in the rebuild kit.
     
    Don X, Jul 18, 2007
    #18
  19. friendxconnect

    friendxconnect Member

    Sparky excuse my english, I put a circle on the part I need
    Bruno

    [​IMG]
     
    friendxconnect, Jul 19, 2007
    #19
  20. sparky

    sparky Sandgroper Staff Member Founder

    Thanks Bruno.

    Your English is fine. It's better than my Spanish is that I'm working on learning now.

    The part you circled is in the kit. It's part of the accelerator pump assembly. It's in the package on the lower left side. I've not seen a 2G rebuild kit without one.
     
    sparky, Jul 19, 2007
    #20
Page 1 of 2