1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheel Studs

Discussion in 'Early CJ5 and CJ6 Tech' started by GreenKaiser, May 22, 2007.

  1. May 22, 2007
    GreenKaiser

    GreenKaiser Flamed out again....

    Nashville, TN
    Joined:
    Nov 23, 2005
    Messages:
    47
    For future reference: Longer wheel studs can be had by using a set of Moroso 46180 wheel studs with .615" knurl work just fine. They are 3" long with a quick start nose. Carry a deep well socket for the lug nuts.

    Also did the button head screw conversion on the spindle bolts. Put short studs in the bottom kingpin bolt holes and J-B welded them in to stop oil drips. I also run studs in the lockout hub holes with Stover nuts.
     
    GreenKaiser, May 22, 2007
    #1
New Posts