1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Data plate question

Discussion in 'Early CJ5 and CJ6 Tech' started by 58WillysCJ5, May 15, 2007.

  1. 58WillysCJ5

    58WillysCJ5 New Member

    Can anyone tell me how the data plates attach to the starter and generator on an F-134? Both are stock but I don't see any rivet holes if that's how they were originally attached.
     
    58WillysCJ5, May 15, 2007
    #1
  2. Rondog

    Rondog just hangin' out

    I'm pretty sure that rivets are what was used. Holes are probably full of paint, grease or other funk.
     
    Rondog, May 16, 2007
    #2