1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Steering Wheel Removal

Discussion in 'Early CJ5 and CJ6 Tech' started by JEREMYJEEP, Mar 30, 2007.

  1. Mar 30, 2007
    JEREMYJEEP

    JEREMYJEEP New Member

    Texas
    Joined:
    Jul 16, 2006
    Messages:
    34
    I just bought a nother CJ5 to use for parts the body is in great shape. I was told that the jeep had been outside for 10 years it looked awful good for that, then I talked to the guy when i went to buy it. It had been in a garage until a year ago when they tore it down. Anyway I am going to switch bodys I have soaked with WD 40 and ZEP 2000 it will not budge. Please help!
     
    JEREMYJEEP, Mar 30, 2007
    #1
  2. Mar 30, 2007
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Please.........pretty please with a cherry

    do a search.........
     
    blevisay, Mar 30, 2007
    #2
  3. Mar 30, 2007
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Mar 30, 2007
    #3
  4. Mar 30, 2007
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,191
    If your tub is shot, pull the box off the frame (3 bolts) and pull it up thru whats left of your floorboards. Then you can put it in a vice and have at it.
     
    SIDSCJ, Mar 30, 2007
    #4
  5. Mar 30, 2007
    Doug/Tucson

    Doug/Tucson Member

    Joined:
    Mar 17, 2007
    Messages:
    274
    I was at Willys works in Tucson when a costumer brought in a photograph of the wooden steering wheel puler that had been built by somebody here on this site or the Willys tech site, can't remember which one it was their only concern was that the puler might flair out. The main shaft with the threats
    otherwise, it was a pretty good idea
    Doug
     
    Doug/Tucson, Mar 30, 2007
    #5
New Posts