1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

OEM Front Seat belts question

Discussion in 'Early CJ5 and CJ6 Tech' started by PatchyCJ5, Jan 16, 2007.

  1. PatchyCJ5

    PatchyCJ5 Toledo Steel

    Hey Guys,

    Just wanted to ask if anyone had any original, or original looking front seatbelts. I wanted to see your set up - what the anchors on the floor look like, and how they connect to the belt itself. Patchy didnt come with seatbelts, and want to know where to start when it comes to buying some seatbelts. Thanks Much.
     
    PatchyCJ5, Jan 16, 2007
    #1
  2. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Just a question- Do you have a roll bar or roll cage installed? From your avatar it doesn't look like you do-

    If not I think you should read
    & seriously think about whether or not you actually want belts.

    H.
     
    Howard Eisenhauer, Jan 16, 2007
    #2
  3. PatchyCJ5

    PatchyCJ5 Toledo Steel

    No roll bar installed. Outta curiosity, why wouldnt I want belts if no rollbar installed? Guess I dont wanna be belted if patchy rolls on me right? R) Just seeking input.
     
    PatchyCJ5, Jan 16, 2007
    #3
  4. mb82

    mb82 I feel great!

    The theory is that you get thrown from a rolling Jeep in order to keep from getting rolled over.
     
    mb82, Jan 16, 2007
    #4
  5. PatchyCJ5

    PatchyCJ5 Toledo Steel

    True, that makes sense. I just didnt want to get thrown out in the event of a minor fender bender. But I guess we cant choose what kind of accidents we get involved in right?
     
    PatchyCJ5, Jan 16, 2007
    #5
  6. spize909

    spize909 '65 Tux........SOLD

    My Jeep went into the shop today, if I see that you don't get any good info I will post some pics when I get it back.
     
    spize909, Jan 16, 2007
    #6
  7. mb82

    mb82 I feel great!

    In my mind if you are worried about a minor fender bender then a roll bar is not a big deal to add. While you will get many more stares without the rollbar the safety addition is well worth it in my book.
     
    mb82, Jan 16, 2007
    #7
  8. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Sorry 'bout that- somehow the link I put in my post didn't make it :rofl:

    Here's the link that should have appeared after "read"-

    http://www.earlycj5.com/forums/showthread.php?t=28425&page=2

    Start reading around post # 19 or so where the thread gets hijacked to seatbelts.

    H.
     
    Howard Eisenhauer, Jan 16, 2007
    #8
  9. 1960willyscj5

    1960willyscj5 Well-Known Member

    You probably won't find any seatbelt hookups or seatbelts factory installed before '66 or so. They weren't required by the feds, same as the rollbars.

    Remember to get some 1/4 inch plate about 4" square to back the mounting up with. Spreads the pressure over a greater area of sheet metal.:coffee:
     
    1960willyscj5, Jan 17, 2007
    #9