1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Problem with hydraulic clutch

Discussion in 'Early CJ5 and CJ6 Tech' started by captain cj, Nov 26, 2006.

  1. Nov 26, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    I installed my slave cylinder (pull type) and bled the system but the travel of the cylinder seems to be less than one inch, That cant be enough to disengage the clutch could it?:? anyone have any ideas? Dan, dont you have a pull type slave?
     
    captain cj, Nov 26, 2006
    #1
  2. Nov 26, 2006
    green71jeep

    green71jeep work in progress

    Riegelsville Pa
    Joined:
    Sep 6, 2005
    Messages:
    144
    It takes very little to disengage a clutch if everything is set right .After you set your freeplay that should be pleanty.
     
    green71jeep, Nov 26, 2006
    #2
New Posts