1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Ballast Resistor

Discussion in 'Early CJ5 and CJ6 Tech' started by beeser, Nov 11, 2006.

  1. Nov 11, 2006
    beeser

    beeser Member

    Arizona
    Joined:
    Jan 8, 2003
    Messages:
    587
    A while ago I replaced my original Prestolite distributor with a Delco. The FSM shows a different ballast resistor dependent on the distributor. Does anyone have a part number for the one used on the Delco?
     
    beeser, Nov 11, 2006
    #1
  2. Nov 11, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    RU4 is the borg-warner number I believe.
     
    MOP, Nov 11, 2006
    #2
  3. Nov 11, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    Or Napa # ECH ICR13

    The prestolite is ~1.2-1.3 ohm's

    The Delco is ~1.8 ohm's
     
    MOP, Nov 11, 2006
    #3
  4. Nov 11, 2006
    beeser

    beeser Member

    Arizona
    Joined:
    Jan 8, 2003
    Messages:
    587
    Thanks Mike! I'll pay a visit to NAPA Monday.
     
    beeser, Nov 11, 2006
    #4
  5. Nov 20, 2006
    stevec

    stevec New Member

    Joined:
    Nov 20, 2006
    Messages:
    1
    Would anyone know the part number for a 2.5 ohm resistor? I can't find one any where. I need one with two contacts and not four.
     
    stevec, Nov 20, 2006
    #5
New Posts