1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fuel and Temp gauges..

Discussion in 'Intermediate CJ-5/6/7/8' started by wsg, Nov 3, 2006.

  1. Nov 3, 2006
    wsg

    wsg Member

    Hartselle, Alabama
    Joined:
    Nov 21, 2005
    Messages:
    90
    Took my Odomter/gauge cluster out to diagnose it..after some study it seems i have an aftermarket gauge cluster.

    Im not seeing anywhere that helps trouble shoot this kind of gauge. Anybody have this type with only two posts on the fuel and temp gauges? These two dont work and im not sure how to hook them up without any other directions.

    They both have posts listed as "S" and "I" but there is no "A" and it has the two "I" posts hooked together with the jumper. I am definately not an electrical guy but this isnt how the tech articles ive seen show either.

    Any ideas?
     
    wsg, Nov 3, 2006
    #1
  2. Nov 12, 2006
    newjeep75

    newjeep75 New Member

    Toronto
    Joined:
    Feb 7, 2006
    Messages:
    44


    Try this site:
    http://www.luanjp.com/mods/electrical/GT1CheckFuse.asp
     
    newjeep75, Nov 12, 2006
    #2
  3. Nov 12, 2006
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    there should be a hot wire from a 12v source to one of the I (ignition) terminals, S (sender) terminals. that's all there is to it.
     
    $ sink, Nov 12, 2006
    #3
New Posts