1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

73 Clutch kit

Discussion in 'Intermediate CJ-5/6/7/8' started by mrunnell, Oct 13, 2006.

  1. Oct 13, 2006
    mrunnell

    mrunnell Member

    Lafayette, IN
    Joined:
    May 21, 2006
    Messages:
    73
    I am in the midst of the frame off restore of my 73. I am replacing, or trying, all of the clutch linkage. Can someone post a photo of the frame and housing mounts? I do not beieve that anyone aftermartets the complete linkage kit for the 72-75 - meaning including bellcrank frame brackets, but correct me if I am wrong.
     
  2. Oct 13, 2006
    mrunnell

    mrunnell Member

    Lafayette, IN
    Joined:
    May 21, 2006
    Messages:
    73
    one more thing - anyone use or fab something from the 76-86 kits?
     
  3. Oct 13, 2006
    SwampRatt

    SwampRatt 1973 CJ-5

    Naperville, Illinois
    Joined:
    Sep 15, 2006
    Messages:
    109
    Here is what it should look like. I've replaced all of mine.
    [​IMG]
     
  4. Oct 14, 2006
    mrunnell

    mrunnell Member

    Lafayette, IN
    Joined:
    May 21, 2006
    Messages:
    73
    thanks for the picture. what does the other end that you cannot see connect to? Did you fab it all yourself or use a kit for the mounting brackets? It looks good, thanks.
     
  5. Oct 14, 2006
    SwampRatt

    SwampRatt 1973 CJ-5

    Naperville, Illinois
    Joined:
    Sep 15, 2006
    Messages:
    109
    You can see the transmission side. Here is the other side.
    [​IMG]

    I never figured out the return spring. Hense the Ace hardware spring Mickey Mouse. I have the real spring. Can anybody tell me how it hooks up?
     
  6. Oct 14, 2006
    mrunnell

    mrunnell Member

    Lafayette, IN
    Joined:
    May 21, 2006
    Messages:
    73
    I wasnt talking about inside the cab, I was wondering about the north side of the first picture- - the innersupport bracket that connects to the bellcrank. Does it secure to the bellhousing or something else

    your mickey mouse spring, or rather the real one, connects from the upper part of the clutch pedal to the under part of the whole clutch assembly (what attaches to the body.) There is a hook to catch the spring.
     
  7. Oct 14, 2006
    SwampRatt

    SwampRatt 1973 CJ-5

    Naperville, Illinois
    Joined:
    Sep 15, 2006
    Messages:
    109
    I'll trade ya a pic of the engine side of the bell crank for a pic of the clutch return spring. :) (I'll take the pic anyway)
     
  8. Oct 14, 2006
    SwampRatt

    SwampRatt 1973 CJ-5

    Naperville, Illinois
    Joined:
    Sep 15, 2006
    Messages:
    109
    Here is the other side. The Bell Crank meets a ball knob thet mounts the the front side of the bell housing.

    [​IMG]

    Hope this helps.
     
  9. Oct 14, 2006
    mrunnell

    mrunnell Member

    Lafayette, IN
    Joined:
    May 21, 2006
    Messages:
    73
    Thank you, that it what I was looking for. I'd like to help ya out but I just have a bare frame and just now getting it rolling. I thank you for all the help, but sorry I could not help in return. Heres a :beer: for the troubles though.
     
  10. Oct 16, 2006
    xlr8n

    xlr8n Member

    Sparks, Nv.
    Joined:
    Sep 14, 2005
    Messages:
    145
    I recently fabbed in a hydraulic clutch on my '75 so I have all the linkage and mounting brackets available. The rod that connects to the pedal has been extended to accommodate the body lift but can be cut back if necessary. Everything is in good condition.

    PM me if you're interested in these parts.
     
New Posts