1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New dash pad installation

Discussion in 'Intermediate CJ-5/6/7/8' started by Tony C, Sep 9, 2006.

  1. Sep 9, 2006
    Tony C

    Tony C Bubblehead

    Dothan, AL
    Joined:
    Aug 25, 2006
    Messages:
    37
    I won an auction today for a new dash pad for pre 1975 Jeep CJ and was wondering how this attaches to the windshield. If anyone still has one of these could you reply so I will have whats needed before it gets here. Thanks.
     
    Tony C, Sep 9, 2006
    #1
  2. Sep 10, 2006
    original cj5

    original cj5 They call me Mr Bubba

    Murphy, NC
    Joined:
    Sep 30, 2005
    Messages:
    200
    I had one on my 74, but removed it for asthetic reasons. On the back side of the pad you will find 5 tabs. These tabs will rest on the upper surface of the lower windshield frame, between the defrost vents. You should see 5 holes in the W/S frame between the defrost vents. Simply run 5 screws through the tabs & into the holes in the frame & VIOLA, it's installed. Now go have a :beer:
     
    original cj5, Sep 10, 2006
    #2
  3. Sep 10, 2006
    Tony C

    Tony C Bubblehead

    Dothan, AL
    Joined:
    Aug 25, 2006
    Messages:
    37
    Thanks Tim, Doesn't even look like a :beer: job. This is a new pad thats been in the box from the early 70's so hopefully it will be worth the trouble. Tim, your 74 is CLEAN!......I like it. Thanks again.
     
    Tony C, Sep 10, 2006
    #3
New Posts