1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hand Brake Cable attachment in the engine compartment

Discussion in 'Early Jeep Restoration and Research' started by gscj5, Aug 31, 2006.

  1. Aug 31, 2006
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    Does any body know the correct route of the hand brake cable in the engine compartment; behind the exahust in front of exhaust? I have it connected to the tranny cross member already. I just need to know where it connects in the engine bay; I think there is suppose to be a bracket attached to something. Pics would be greatly appreciated. 62 f-head

    Thanks, Greg
     
    gscj5, Aug 31, 2006
    #1
  2. Sep 1, 2006
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,125
    Snakes down between the steering column & the exhaust. Where it riubs against the inner fender it gets held down with a cable clamp.

    [​IMG]

    H.
     
    Howard Eisenhauer, Sep 1, 2006
    #2
  3. Sep 1, 2006
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    Oh man! Thanks Howey you are so cool, I have searched this entire site and found nothing. You might have Sparky put this photo in the archives:D

    You da man!

    Thanks, Greg
     
    gscj5, Sep 1, 2006
    #3
New Posts