1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What wire harness with generator?

Discussion in 'Early CJ5 and CJ6 Tech' started by toolbox, Aug 30, 2006.

  1. Aug 30, 2006
    toolbox

    toolbox If you get bored, I've got the projects.

    Hamilton, Montana
    Joined:
    Jul 27, 2006
    Messages:
    347
    Hey guys/gals!

    At some point I'm going to have to pull the spagetti mess out of the '55 and re-wire everything. I know EZ wire and Painless make a good harness, but I'm planning on keeping the stock generator & regulator setup. What harness would be best for this?
    It's been interesting seeing all the other wiring projects on here lately :shock:
     
    toolbox, Aug 30, 2006
    #1
  2. Aug 30, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Doesn't matter IMO.

    It'll hook up just the same. You'll need to make mods to either one likely to make it work.
     
    sparky, Aug 30, 2006
    #2
New Posts