1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Progress Report

Discussion in 'Flat Fender Tech' started by skipper85, Aug 28, 2006.

  1. skipper85

    skipper85 New Member

    Good morning!!
    I hope that everyone had a good weekend. It has been a while since I have had a chance to update everyone on the progress I have made on my 46' CJ2A. I have removed the body. Rebuilt the shifter assembly.(Turns out it was the only problem with the transmission. :beer: ) Installed a new master brake cylinder. Patched the small hole on the driver's side rear quarter pannel. I have coated the interior with a roll-on bed liner and have the external color on order. I am still debating the direction I want to go with the gas tank. (Any suggestions?) Well,
    enough talk... Here are some pics... :)
     
    skipper85, Aug 28, 2006
    #1
  2. catdieselpowa

    catdieselpowa New Member

    Looks good, good luck with the rest. I think I am going to bedline my interior also.
     
    catdieselpowa, Aug 29, 2006
    #2
  3. 51M38

    51M38 New Member

    Looks like mine did about 6 months ago. I know what your feeling right now( cant wait to get everything back together) I used a herculiner roll on that I am very pleased with. I used a CJ3 gas tank in mine easier to find. Good Luck with your project!
     
    51M38, Aug 29, 2006
    #3
  4. Andy4802

    Andy4802 Canadian Jeep junkie

    one good way to go with the tank is to install a fuel cell in the back. never have to worry about rust that way.. .but only if its going to be an open top jeep :)
     
    Andy4802, Aug 29, 2006
    #4