t98 clutch

hi,is a t98 clutch disc different than a t90? i havent found a listing for the t98 trans,the input shaft is a ten spline 1 1/16 diameter i thought the t90 was 1 1/8, also the throw out bearing is that the same? anyone know where i can get a clutch kit for a f134 & t98 trans in a cj? thanks

 

The clutch disk is the same between t-90 and t-98.

Now that I've said that, I have found some disks that almost must be 'forced' on to a t-98 shaft, and others that slide on easily.

If you are looking for a clutch disk, I'd stay away from the jeep parts vendors. They get their parts from Omix-Ada, and that generally means low quality, low end, may or may not fit hardware.

Go for a name brand clutch plate at NAPA or some other FLAPS dealer and pay the extra few $$ (if any) for the name brand.

The clutch disks I have in the shop that fit the t-98 easily are ALL marked with the name brand, whilst the ones that don't fit easily are not marked.

Note that all the disks fit a t-90 shaft easily.

kamel

 

hi thanks for the input Kamel would you sell me a clutch kit for the t98 ?

 

No, I sell mostly used stuff and you don't want a used clutch.

I'll do this, though.

I will go out to the barn tomorrow and check the clutch disks and give you the brand names.

If they have part numbers on them I'll give you that too.

kamel