1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

transmission install

Discussion in 'Jeepster Commando and Commando Tech' started by donald, Jul 14, 2006.

  1. Jul 14, 2006
    donald

    donald don lienhard

    Larsen, Wi.
    Joined:
    May 17, 2006
    Messages:
    26
    Want to reinstall my 3 speed trans.Iwould like to bolt the adaptor and trans. to the bellhousing, then attach these to the motor,or should I bolt up the bellhousing , then adaptor, then trans. I recently had to swap out the trans.,when I did I pushed the clutch fork off of the ball mount thus ruining the clutch fork and dont want to do this again. Figure it would be better to install as a unit. Comments??
     
    donald, Jul 14, 2006
    #1
  2. Jul 14, 2006
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    I've found it's easier to bolt the bellhousing to the engine first, install the trans then install the transfer case. But that's just me.
     
    Pack Rat, Jul 14, 2006
    #2
New Posts