1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What's this part?

Discussion in 'Early CJ5 and CJ6 Tech' started by Hippo393, Jun 25, 2006.

  1. Jun 25, 2006
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Anyone know? At first I thought it was an x-fer case clutch bellcrank mount but now I'm not so sure. It's got a hole for a cotter pin (top right).
     
    Hippo393, Jun 25, 2006
    #1
  2. Jun 25, 2006
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    I'm thinking single stick D18 shift lever bracket but..
    I thought the bracket was cast, that looks like it's stamped
     
    jpflat2a, Jun 25, 2006
    #2
  3. Jun 25, 2006
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    X2
     
    willysnut, Jun 25, 2006
    #3
  4. Jun 25, 2006
    181jeep

    181jeep Banned

    central valley, ca
    Joined:
    Feb 3, 2004
    Messages:
    376
    looks a little like a warn OD shift lever pivot that bolts to 2 tranny top bolts.

    JB
     
    181jeep, Jun 25, 2006
    #4
  5. Jun 26, 2006
    grannyscj

    grannyscj Headed to the Yukon

    Anchorage, AK
    Joined:
    Dec 19, 2005
    Messages:
    1,758
    Doesn't look at all like my D18 shift lever bracket. Mines made out of steel plate.
    View attachment 11406
     
    grannyscj, Jun 26, 2006
    #5
  6. Jun 26, 2006
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    X2
     
    Posimoto, Jun 26, 2006
    #6
  7. Jun 26, 2006
    linckeil

    linckeil Member

    Danbury CT
    Joined:
    Aug 19, 2004
    Messages:
    492
    it looks like it would put the pivot point of the OD shift lever too far away from the tower. on a twin stick transfer case, i'd imagine it would interfere with the front bearing retainer. maybe it would work with a single stick transfer case?
     
    linckeil, Jun 26, 2006
    #7
  8. Jun 26, 2006
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    PTO stick mount?
     
    66cj5, Jun 26, 2006
    #8
  9. Jun 26, 2006
    CJ

    CJ Member

    Phoenix, Arizona
    Joined:
    Mar 5, 2006
    Messages:
    200
    X2
     
    CJ, Jun 26, 2006
    #9
  10. Jun 26, 2006
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Thanks for everyone's input. I want to include it in my "Jeep Junk" for sale ad, but not without knowing what it is. The single-stick pivot on my last Jeep was much different looking.
     
    Hippo393, Jun 26, 2006
    #10
  11. Jun 26, 2006
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    The pivot for my OD is just a piece of angle, shaped similarly like that, but it has a hole in the upper part of the angle for a bolt to go thru the bracket and shifter. The hole in the shifter is big enough for a 1/2" bolt to fit thru.




    But I could just be wierd:D
     
    termin8ed, Jun 26, 2006
    #11
  12. Jun 26, 2006
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    I've never seen a PTO lever that didn't mount into the PTO housing, without a bracket. It's definitely not a single stick Tcase shifter bracket. I'm still going with an OD shifter bracket. They can vary in shape depending on the tranny that it's being used with. I've never seen any variation in a single stick setup.
     
    Posimoto, Jun 26, 2006
    #12
  13. Jun 26, 2006
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    after further review:
    :iagree:
    :beer:
     
    jpflat2a, Jun 26, 2006
    #13
New Posts