Clutch Fork

Installed the fork to night.
Read about an hour worth info here on the subject and still have one question.

How much free movement in the fork is allowable. I have about 1/2" or so, seems like to much to me.

Opinions? Experiences?

Thanks all.

 

the book says 3/4" free play at the pedal
that might be about right

 

I'm going the Quarter Master hydraulic route, no idea. lol

 

Sounds expensive! Is it?

 

I have a 225 with sm420 behind it sitting on the shop floor ready to go it the next jeep project. It has almost 3/4" of travel at the end of the fork.
I'm not worried about mine, It was working before It was taken apart, If I had no freeplay I would worry.

 

by the way, once set your freeplay at the pedal, your linkage/cable or what ever you use is only going to let the thowout bearing slide back about 1/16 or so away from the preasure plate.

 

If the gears clash when shifting, it's too much play.