1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rotisserie

Discussion in 'Builds and Fabricators Forum' started by tommy b, May 14, 2006.

Page 3 of 3
  1. Jun 15, 2006
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190
    Well done article, got me to thinking about the 2 engine stands in the garage. At a 750lb rating on each one I think it'll work!
     
    SIDSCJ, Jun 15, 2006
    #41
  2. Jun 15, 2006
    boxer

    boxer New Member

    Western Washington
    Joined:
    Sep 17, 2004
    Messages:
    47
    Nice job! Sure looks like it works good.
     
    boxer, Jun 15, 2006
    #42
  3. Jun 15, 2006
    tommy b

    tommy b Member

    Golden, Colorado
    Joined:
    Oct 23, 2005
    Messages:
    341
    I did see an article on the web from a guy who made one from three engine stands. He cut up the third one to modify the other two, which he used for the ends. As I remember, he lengthened the base arms and increased the height to the pivot point. You can probably find the article by googling.

    The reason I didn't go that way was that I would have at least $120 invested in three stands and I wasn't sure what they were made out of. Probably metric tubing. Plus the wheels were too small. If you have two stands already, it might work for you.

    tommy b
     
    tommy b, Jun 15, 2006
    #43
  4. Feb 22, 2007
    tommy b

    tommy b Member

    Golden, Colorado
    Joined:
    Oct 23, 2005
    Messages:
    341
    Bob,

    I was just going through this thread, looking for the scrapyard addy and I saw this post. Did you ever build one? If so, how did it turn out?

    tommy b
     
    tommy b, Feb 22, 2007
    #44
Page 3 of 3
New Posts