1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pump Bracket

Discussion in 'Intermediate CJ-5/6/7/8' started by LYKOS, Mar 22, 2006.

  1. Mar 22, 2006
    LYKOS

    LYKOS Newbie

    Joined:
    Nov 1, 2005
    Messages:
    10
    Will the power steering Pum braket off a 76 258 work on my 73?

    Doing a P/S swap and found the bracket on ebay.
     
    LYKOS, Mar 22, 2006
    #1
  2. Mar 22, 2006
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    here are some pics of the brackets and pump mounting
    74 and earlier mount on the pass side of the engine
    75 and later mount on the drivers side of the engine
    regardless, you will need all of the components/brackets to make it work regardless of the year
     
    jpflat2a, Mar 22, 2006
    #2
  3. Mar 27, 2006
    LYKOS

    LYKOS Newbie

    Joined:
    Nov 1, 2005
    Messages:
    10
    So this means I can use either so long as I have the complete assembly?
     
    LYKOS, Mar 27, 2006
    #3
  4. Mar 27, 2006
    lowderthanever

    lowderthanever Member

    clemmons nc
    Joined:
    Dec 15, 2005
    Messages:
    65
    check the locations of the threaded bosses in the block. I used parts off of a 76 gremlin on my 72 232 cj5 and had some issues with holes not lining up exactly right. Really wasn't that big an issue with a some minor fab. work. Also, some early intakes don't have a threaded boss for the pump bracket. You will also need the timing cover from the doner motor, the stock cover has no place to mount accessarys to. Hope this helps, if i can offer anymore insight, let me know.
     
    lowderthanever, Mar 27, 2006
    #4
New Posts