1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

CJ5 parts for CJ3a

Discussion in 'Flat Fender Tech' started by NoFlyZone, Mar 20, 2006.

  1. Mar 20, 2006
    NoFlyZone

    NoFlyZone Member

    Ridgeville, SC
    Joined:
    Mar 17, 2006
    Messages:
    578
    Are there many parts I can use from an early f134 powered CJ5 on my Cj3a?
     
    NoFlyZone, Mar 20, 2006
    #1
  2. Mar 20, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    Most of the drive train should swap. But that's should and not a definite yes.
     
    Glenn, Mar 20, 2006
    #2
  3. Mar 20, 2006
    Txjake

    Txjake I wrenched with Sparky

    Oklahoma City OK
    Joined:
    Feb 3, 2006
    Messages:
    544
    Axles, transmission & tcase. engine, if you are creative with the carb. Not sure, but I think the Ross steering box is the same.
     
    Txjake, Mar 20, 2006
    #3
  4. Mar 20, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Aren't the front springs the same? Front driveshaft? CJ-5 rear springs are longer IIRC. The Holley 1V from a Falcon is short enough so that the F-head will fit under the short hood, again IIRC.
     
    timgr, Mar 20, 2006
    #4
  5. Mar 20, 2006
    NoFlyZone

    NoFlyZone Member

    Ridgeville, SC
    Joined:
    Mar 17, 2006
    Messages:
    578
    I am trying to justify buying those two CJ5s on the willystechboard
     
    NoFlyZone, Mar 20, 2006
    #5
  6. Mar 20, 2006
    Kodiak12060

    Kodiak12060 Sponsor

    Beacon NY
    Joined:
    Sep 27, 2002
    Messages:
    465
    Flywheels are different if you go from one to the other.
    I have a 3A flywheel if you need one. It's a takeout $10
     
    Kodiak12060, Mar 20, 2006
    #6
New Posts