master cylinder change

gents, i am swapping in axles from a late model waggy with big ole drums in back and disks brakes in front... but the old 74 brake setup i am using is setup with drums front and rear. its got a power booster at the moment and i am wondering if anyone knows which master cylinder out there will bolt in place and work with those new fangled disc brakes.

any info would be greatly appreciated.
thanks
dan

 

I've got a 1974 cj5 with manual brakes, what do I have too do to put a booster on?:?

 

I went to the napa store and found one that would mount up with a bigger boar size I think I went from 15/16 to 1 1/8 made a big difference.


jerry

 

I made the swap from 4 wheel drums to disc's on the front. At the same time I converted from manual to power. I used a master/booster setup from a wrangler. It also had the prop valve that you will need with the discs. It was an easy swap I had to drill 2 holes for the booster to mount but that was all. Works great no more pulling one way or the other when you hit the brakes