1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Alternator Clocking

Discussion in 'Early CJ5 and CJ6 Tech' started by linckeil, Mar 13, 2006.

  1. Mar 13, 2006
    linckeil

    linckeil Member

    Danbury CT
    Joined:
    Aug 19, 2004
    Messages:
    492
    I'm running a GM alternator on my jeep project, but I can't find one with the clocking I need. I've re-clocked a Ford alternator before by simply removing the bolts that hold the 2 halves of the case together and rotating it to where I needed it. Can I do the same with a GM alternator? I think the answer would be yes, but I wanted to check here first. And in case it matters, its a GM model 12 SI alternator....
     
    linckeil, Mar 13, 2006
    #1
  2. Mar 13, 2006
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yup. When you have it apart, push the brushes back into their holders and insert a wire thru the hole on the back of the case to hold the brushes down.. Don't forget to remove the wire before you try to run it....
     
    Patrick, Mar 13, 2006
    #2
  3. Mar 13, 2006
    linckeil

    linckeil Member

    Danbury CT
    Joined:
    Aug 19, 2004
    Messages:
    492
    just what i wanted to hear. thanks.
     
    linckeil, Mar 13, 2006
    #3
New Posts