1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where To Find Parts

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, Sep 27, 2004.

  1. May 9, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,797
    There is no factory gauge, so you'll have to take whatever sender the gauge maker provides. 1/8" NPT is pretty standard ... the block tap should be a NPT thread. https://www.amazon.com/KOOTANS-Redu...=1+4+to+1+8+npt+adapter&qid=1620572133&sr=8-3

    If you buy the Stewart-Warner electric gauge that's closest to what came in the Renegades and such, they require this sender:
    https://www.summitracing.com/parts/sww-279a

    You notice that it comes with a 1/4" to 1/8" adapter. They don't tell you what the sender specs are, because they want you to buy their product.
     
    Last edited: May 9, 2021
    truckee4x4 likes this.
  2. May 9, 2021
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,550
  3. May 9, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    How did you get that picture of me!
     
    Focker likes this.
  4. May 9, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
  5. May 9, 2021
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    10,208

    That should read "ONLY" fifty years old.
     
  6. May 30, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Anyone have a line on a good source for phenolic or billet carb spacer for a 2GC to a Dauntless? Just got home and the one I bought two weeks ago showed up while I was gone. The seller on EBay said it fit but it’s too big.
     
  7. May 30, 2021
    tom h

    tom h New Member 2022 Sponsor

    Buffalo NY
    Joined:
    Dec 3, 2006
    Messages:
    48
    Good morning, try Summit Racing
     
  8. May 30, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Summit has some that say they fit, yet in the comments folks say they don’t fit and were returned. Same with My two FLAPS.

    I know I’m far from the first person to do this so I’m hoping another member here can say “I bought this one and it fit” and share a link.

    Edit - I think this is it in case anyone else needs one:
    For Small Rochester 2G 2-Jet Carburetor Spacer Phenolic Riser Insulator 1/2" Kit | eBay
     
    Last edited: May 31, 2021
    Focker likes this.
  9. Jun 15, 2021
    Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    East Tennessee
    Joined:
    Feb 8, 2021
    Messages:
    1,872
    Ignition parts - Not Imported from China

    I have bought several hard to find items from "Classic Military Vehicles" over the years and have been pleased with the quality of everything I have gotten from there.

    The tune up "kit" I installed only a couple of months ago in my 67 CJ5 suddenly lost spark today. I determined the condenser had failed by replacing it with the one from my other running Jeep. This kit was from a reputable supplier, but I suspect it is a Far East import.

    I looked at several suppliers sites, all have condensers, but since they do not specify the origin I suspect they are Asian imports.

    Not wanting to buy another POS I did some more searching and found that "Classic Militrary Vehicles" lists "Blue Streak" brand components, which should be good quality. I ordered a couple of condensers and contact points from there.
     
  10. Jul 9, 2021
    Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    East Tennessee
    Joined:
    Feb 8, 2021
    Messages:
    1,872
    Quality brake line kit for early CJ5.

    I recently finished replacing all components of the brake system on my 67 CJ5, with an upgrade to 11" drum brakes all around.

    Many suppliers offer brake line kits, but most I could find were for the brake system with the front lines on the axle going into short flex lines at the knuckles, such as was used on some CJs and on M38A1 Jeeps.

    Problem is my Jeep has the system with the front line routed under the radiator going to longer flex lines on the frame which connect directly to the wheel cylinders. I had to do a lot of searching to find a kit for that.

    I finally found the appropriate kit at Walcks and want to mention how pleased I am with the kit. It fit perfectly and having 11" brakes instead of the stock 9" posed no problem at the rear either.

    It was a feat of some magnitude routing the frame line going to the rear, but once I managed to snake it through all the obstacles it too fit perfectly at both ends.

    It is a very good quality kit, and I think it well worth the price considering the trouble, and time it saved me had I fabricated my own lines.
     
  11. Feb 3, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
  12. Feb 3, 2022
    Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    East Tennessee
    Joined:
    Feb 8, 2021
    Messages:
    1,872
    I have a cluster removed from a junk CJ5 which still has most of those sockets, other than a couple I used to fix mine. If you want, I can box them up and send them to you for the cost of postage.
     
    truckee4x4 likes this.
  13. Feb 3, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Thank you very much for the offer. I need to dig my original wiring harness out of storage and assess whether or not I can salvage the sockets, if not I will send you a private message.
     
  14. Mar 6, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Does anyone know what the technical term is for these "mushroom" or "T-top" posts atop these low-pressure hydraulic brake pressure switches are?
    [​IMG]

    The pigtail that came with it (like the one pictured above) is loosey-goosey and I want to wire it with a better connector.

    I've tried searching Waytek/Amazon/Google but I don't think I am using the right terminology for the posts.

    So far I found these JEGS connectors, which I ordered and returned as they are too small: https://www.amazon.com/gp/product/B078WJFGCB/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

    And I see these options at Summit:
    https://www.summitracing.com/parts/pco-5656pt?rrec=true

    But I'd like to know what the name of the type of terminal is.
     
  15. Mar 7, 2022
    skipilot

    skipilot Member

    Joined:
    Dec 16, 2007
    Messages:
    75
    You could de-pin your existing flat connector housing and replace the terminal ends. They should be a standard female 56 series connector like these
    https://www.americanautowire.com/shop/terminals
    I did that on one of mine. There are lots of places to get the terminal ends, I just used American Autowire for an example. If you need the housing also, I didn’t see it on their site but wouldn’t be surprised that if you called them, they could supply it. Here’s another source, they may be able to sell you just the connector parts
    https://www.ronfrancis.com/product/709
    good luck,

    Tim
     
    truckee4x4 likes this.
  16. Mar 10, 2022
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,660
    truckee4x4 likes this.
  17. Jul 5, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    What are the correct length wheel studs for a 1966 CJ five Dana 44? The ones I have pressed into the hub I bent and am replacing (from Kaiser Willys) have three-quarter inch of threads, these that I ordered from Summit have 1 inch:

    Check out this page from Summit Racing https://www.summitracing.com/parts/yga-33187

    AC301026-D349-40F5-9483-EA83F488B401.jpeg
     
  18. Jul 5, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Also – follow up question. I have Herms 11 inch disc brake conversion. I want to go to O’Reilly and try ordering a different set of drums to see if by chance they might be a bit less deep. Does anybody know what jeep 11 inch drum brakes I should be looking up? Would it be in 1970s CJ seven?

    Edit - 1 1970 CJ5 with 11" brakes - would this be worth a try:
    More Information for RAYBESTOS 2307R (rockauto.com)
     
    Last edited: Jul 5, 2022
  19. Jul 5, 2022
    45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Buckley, WA
    Joined:
    Mar 31, 2007
    Messages:
    1,145
     
  20. Aug 10, 2022
    Bulldog Shoaf

    Bulldog Shoaf Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    61
    Anybody out there reproduce these tags Jeep Decals.jpg
     
New Posts